200\nSlew rate: 10V/\u03bcS \n\nInput Section\nInput connector: xlr\nInput sensitivity: 1.4 V (/ 32 \u2013 26 dB) dBm/V RMS\nInput impedance: 20 k\u03a9 (balanced), 10 k\u03a9 (unbalanced) k\u03a9 \n\nOutput Section\nOutput connector: Speakon \n\nSystem Parameters\nCooling: Forced\nProtections: DC, internal fault, input overload, RF interference, unmatched load, output short-circuit, thermal drift, power supply over-current\nAmplifier class: H \n\nPower Requirements\nOperating voltage: 115 \u00f7 240 V (50 / 60 Hz) V ~ Hz\nPower consumption: 350 W \n\nPhysical Specifications\nHeight: 88/3.4 mm/inch\nWidth: 482/18.9 mm/inch\nDepth: 255/10 mm/inch\nNet Weight: 11.2/24.6 kg/lbs"}" data-sheets-userformat="{"2":513,"3":{"1":0},"12":0}">2 x 450 W Class H proffesional amplifier. IPS Series is a range of two-way professional amplifiers that combines high quality performance and reliability with the latest power amplifications technologies. This high value power-to-cost designs offer, in compact lightweight 2 rack unit space, the sound quality and the durability of traditional class AB and class H designs with the innovation of the latest power devices available.IPS 1700 is a 2 channel power amplifier that delivers up to 2 x 450 W RMS @ 4 (900 W RMS bridged @ 8 ), weighing just 12,7 kg. It features independent gain dials, signal – clip and fault LEDs, stereo XLR input and Output link, 1.4 V to 0.775 V input sensitivity switch, mono – stereo – bridge switch, powercon outputs. Moreover, it is protected against shorts and open circuits. Thanks to its high efficiency heat sinks and high speed DC fans, the IPS 1700 can withstand the hardest heat conditions ensuring great reliability.Features2 unit 19" rack, easy transportationFast response and low distortionEasy to configure in stereo / mono / bridge modesExtensive protective circuits ensure high reliability and operating safety.Front panel signal / clip / protect LED indicatorsXLR input connectorsSPEAKON NL4 output connectorsAmplifier SpecificationsPower output stereo 4: 450 W rmsPower output stereo 8: 330 W rmsPower output bridged 8: 900 W rmsFrequency Response -3 dB: 20 Hz ÷ 20 kHzSignal/noise rate: 100 dBCrosstalk: -75 dBDamping factor: > 200Slew rate: 10V/S Input SectionInput connector: xlrInput sensitivity: 1.4 V (/ 32 – 26 dB) dBm/V RMSInput impedance: 20 k (balanced), 10 k (unbalanced) k Output SectionOutput connector: Speakon System ParametersCooling: ForcedProtections: DC, internal fault, input overload, RF interference, unmatched load, output short-circuit, thermal drift, power supply over-currentAmplifier class: H Power RequirementsOperating voltage: 115 ÷ 240 V (50 / 60 Hz) V ~ HzPower consumption: 350 W Physical SpecificationsHeight: 88/3.4 mm/inchWidth: 482/18.9 mm/inchDepth: 255/10 mm/inchNet Weight: 11.2/24.6 kg/lbs.