The Nowsonic Hexacon is a headphone amplifier with 6 separate output channels. Each channel derives its signal from the stereo MAIN INPUT on the rear panel. For a flexible routing you can replace the input signal at the MAIN INPUT and feed the attached headphones with the signal at the DIRECT IN jack on the front panel. In addition, each headphone channel has its own stereo input for monitoring an alternative signal. Each output channel features a BALANCE knob which controls either the panning between the LEFT and RIGHT channel in the MAIN bus or the MIX balance between the MAIN bus and the AUXILIARY input in the channels output. Each output channel features separate controls for BASS and TREBLE for optimizing the output signal as needed. For a simplified setup and a flexible wiring the headphone outputs are in parallel as 1/4″ TRS jacks on the rear and the front panel. Using the two MONO buttons, each channel can individually be toggled between the four operating modes Stereo, Mono Left, Mono Right and Mono Left & Right for providing various monitoring options. On the rear panel you will find balanced inputs (XLR and 1/4″ TRS) for the MAIN bus. The input signal is looped through via normalized THRU sockets (XLR, 1/4″ TRS). This allows to drive additional Hexacon units if needed. The output level is metered via the 8-segment level meters per channel and in the MAIN bus.