Kali Audio IN-5 Aktiv studiomonitor 1 st

Kali Audio IN-5 W — 3-Way Coaxial Studio Monitor

The Kali Audio IN-5 W is a 3-way active near-field studio monitor featuring a coaxial assembly that positions a 25 mm textile-dome tweeter at the acoustic center of a 102 mm optimized-profile midrange. This concentric configuration delivers uniform directivity for locked-in stereo imaging. Handling low frequencies is a separate 127 mm woofer, crossed over at 280 Hz.

Coaxial Architecture and Low-Noise Amplification

What sets this model apart from most 2-way designs is its dedicated midrange driver, relieving the woofer and tweeter from reproducing the vocal range. With the coaxial geometry, the midrange cone serves as the waveguide for the tweeter. A newly designed Class D amplifier supplies 160 W of tri-amplified power, reducing self-noise by about 12 dB compared to the IN-8.

Driver Layout

• Woofer: 127 mm paper-composite cone, front-ported — lets users experience clean bass extension down to 39 Hz
• Midrange: 102 mm optimized-profile cone, coaxial with tweeter — takes on the 280 Hz to 2800 Hz range, crucial for vocal clarity
• High frequencies are handled by a 25 mm textile dome tweeter, nested inside the midrange, and extending the response to 25 kHz.

Power and Frequency Range

With 160 W of tri-amplified Class D power, the IN-5 W uses separate amplifier channels for each driver and incorporates a built-in limiter above 102 dB SPL. Frequency response covers 39 Hz to 25 kHz, with linearity within ±1.5 dB from 50 Hz to 7 kHz.

• Frequency Range: 39 Hz – 25 kHz — reaches below most kick drum fundamentals
• Amplifier Power: 160 W Class D, tri-amplified — each driver gets its own amplification
• Above 102 dB SPL, the built-in limiter activates to protect drivers during loud playback.

Inputs and Boundary EQ

This model provides three analog inputs for both professional and consumer sources. DIP switches on the rear panel enable boundary compensation EQ for freestanding, console, wall, or corner placement.

• Inputs: XLR balanced, 6.3 mm TRS balanced, RCA unbalanced — connects to a variety of audio interfaces and consumer devices
• Use 8 DIP-switch presets in the Boundary EQ to correct low-frequency buildup from nearby walls.
• HF/LF Trim: rear-panel switches — adjust high and low shelf response

Near-Field Mixers, Home Studios, and Immersive Audio Setups

The IN-5 W works well for project-studio engineers and home producers who want near-field monitoring with coaxial imaging precision and solid low-end authority. Its boundary EQ options make it suitable for placement on a desk, on a wall, or on a speaker stand. Immersive audio creators can mount it using compatible hardware.

Kali Audio and the Independence Series

Kali Audio designed the Independence Series as a range of studio monitors focused on accuracy rather than coloration. Sitting in the middle of the lineup, the IN-5 W is the most compact 3-way model. The 'IN' prefix signifies Independence, denoting the series that introduced Kali's quieter amplifier platform. Sound engineers using the larger IN-8 can opt for this instrument in smaller rooms.