Nux B-6 Trådlöst system
The NUX B-6 wireless saxophone microphone system frees saxophonists from the mic stand with a clip-on gooseneck condenser that transmits full-range audio to a plug-in receiver. Operating on the license-free 2.4 GHz band, it delivers 24-bit / 44.1 kHz sound with under 4 ms latency across up to 20 meters of stage space. Three built-in EQ modes tune the response for soprano, alto, and tenor horns, and the included charging case tops up both units between sets.
- Clip-on electret condenser microphone with a specially engineered shock-absorbing gooseneck, effectively reducing mechanical noise from key action.
- 2.4 GHz wireless transmission with 24-bit / 44.1 kHz resolution and under 4 ms latency
- Three dedicated EQ modes for soprano, alto, and tenor saxophone, switched from the transmitter
- Storage case with 3000 mAh battery delivers up to 15 hours of additional runtime for transmitter and receiver
Wireless Saxophone Microphone System for Cord-Free Performance
Built for saxophonists who refuse to be tethered to a mic stand, the NUX B-6 wireless system pairs a clip-on gooseneck condenser transmitter with a plug-in receiver that runs on the license-free 2.4 GHz band. A flexible rubber-wrapped clamp secures the transmitter to the bell of any saxophone, so the capsule stays positioned exactly where it needs to be regardless of how the player moves. Audio reaches the desk at 24-bit / 44.1 kHz resolution across a 20 Hz to 20 kHz frequency response, with latency under 4 ms for near real-time monitoring.
What Sets the B-6 Apart
Engineers developed a patent-pending shock-absorbing structure for the gooseneck microphone to suppress unwanted resonance and key clack that plagues many clip-on designs. The included storage case doubles as a charger, topping up both the transmitter and receiver between sets, while three scene modes apply optimized EQ curves for soprano, alto, and tenor horns.
Wireless Specs and Power
Operating on the 2.4 GHz band, this model is license-free worldwide and pairs automatically when powered on. Battery-powered operation is handled by built-in 500 mAh cells in the transmitter and receiver, and the 3000 mAh charging case extends total runtime by roughly 15 hours between wall charges.
- Frequency Band: 2.4 GHz — license-free worldwide operation with automatic pairing
- Frequency Range: 20 Hz – 20 kHz — full-range response that captures every nuance of the saxophone
- With latency of < 4 ms, live performers can monitor in near real-time on any stage.
- Battery Powered: Yes — 500 mAh internal cells plus 3000 mAh charging case
- Audio Resolution: 24-bit / 44.1 kHz — studio-grade digital transmission
Who the B-6 Is Built For
Working saxophonists who play small clubs, weddings, and corporate gigs will find the NUX B-6 wireless system a practical alternative to dragging a mic stand and XLR cable across the stage. Jazz improvisers benefit from the fixed mic position because the tone stays consistent even when the player wanders off-axis mid-solo. Bandleaders running horn sections can deploy up to six B-6 systems in one venue without interference, and the auto-sleep mode conserves battery after ten minutes of inactivity.
Tillverkad i
Kina
Alla recensioner kommer från verifierade kunder som har köpt en produkt från oss tidigare.
Dokument
Bruksanvisningar
Information om tillverkaren
Säkerhetsanvisningar
Se användarhandboken för specifika säkerhetsinstruktioner för den här produkten.
Förlängd garanti +3 år
Retur upp till 30 dagar
Prisgaranti
Mer än 3 miljoner kunder
Professionell support
