Light4Me HAZE 1500W Hazer

LIGHT4ME HAZE 1500W is a fog machine (hazer) for DJs, clubs, bands and lighting technicians that creates a light, even fog to enhance light beams. During a wedding, concert or club party, simply turn on the hazer so that beams from moving heads, lasers and spotlights become much more visible in the air. An output of 100 m³/min and adjustable fog output as well as fan speed from 1-100% make it possible to adapt the atmosphere to both a small stage and a medium-sized dance floor. The 1500W heating system is ready for operation after approximately 2-3 minutes, so preparing the lighting setup does not require a long wait.

Control the amount of fog and its distribution exactly as needed

Independent 1-100% adjustment of fog output and fan speed allows precise adaptation of the hazer's operation to the lighting setup. You can create a subtle background for light beams or increase the fog intensity during the climax of a concert The built-in fan helps distribute the fog evenly while thermal atomization uses water-based fog fluid. The tank has a capacity of 3 liters while fluid consumption is approximately 40 ml/min.

Timer mode allows you to program fog output without constantly monitoring the device. The duration of each fog burst and the interval between successive cycles can be set from 1-200 seconds. A continuous operation mode is also available, useful during concerts, club parties and longer events.

DMX, RF remote control or control panel operation - quick control in any setup

LIGHT4ME HAZE 1500W can be operated via DMX512, RF wireless remote control or directly from the control panel. DMX mode uses only 2 channels - the first one for fog output intensity and the second one for fan speed. DMX input and output make it easy to integrate the hazer into a stage lighting setup.

The LCD display and 6 buttons provide access to the most important settings without an additional controller. The panel allows you to set the DMX address, fog output intensity, fan speed, fog duration and interval. The RF remote control with a range of approximately 10 meters allows you to adjust fog output and fan speed from a distance.

Safe operation and convenient mounting during events

Dry-run protection automatically stops the device approximately 3 minutes after detecting that there is no fluid. Thermal protection provides additional safety. The cold-rolled steel housing with a black and silver finish measures 45 x 23 x 24 cm, weighs 6 kg and stands on 4 non-slip feet. The yoke mounting bracket with 2 knobs also allows suspended installation while maintaining a horizontal operating orientation.

Power supply via an IEC C14 inlet and a 1.2 m power cord make it easier to provide power to the device when preparing a typical stage setup. The model is designed for operation at temperatures from -10 to 60°C and has an IPX0 protection rating, so it must be protected from water and moisture.

Technical specifications:

• Device type: DMX fog machine (hazer) with wireless remote control and mounting bracket
• Application: creating light, even haze that enhances light beams in stage, club and event applications
• Heating system power: 1500W
• Fog generation system type: thermal atomization (fluid heating)
• Warm-up time: approx. 2-3 min
• Fog output: 100 m³/min
• Fog output intensity adjustment: yes, 1-100%
• Built-in fan: yes
• Fan speed adjustment: yes
• Fan speed adjustment range: 1-100%
• Timer mode: yes
• Fog output duration adjustment: yes, 1-200 s
• Interval adjustment between successive fog outputs: yes, 1-200 s
• Continuous operation mode: yes
• Fluid tank capacity: 3 l
• Recommended fluid type: water-based fog fluid
• Fluid consumption: approx. 40 ml/min
• Dry-run protection: yes, automatic shutdown after approx. 3 min without fluid
• Control: DMX, wireless remote control, manual (control panel)
• Control protocol: DMX512
• Number of DMX channels: 2
• DMX channel functions: fog output intensity adjustment, fan speed adjustment
• Manual operation mode: yes
• Control panel: LCD display + 6 buttons
• Control panel functions: DMX address selection, fog output intensity adjustment, fan speed adjustment, fog duration adjustment and fog interval adjustment
• Wireless remote control type: radio frequency (RF)
• Remote control range: approx. 10 m
• Remote control battery type: 23A 12V, included
• Remote control functions: fog output intensity adjustment, fan speed adjustment
• DMX input: 3-pin male XLR connector
• DMX output: 3-pin female XLR connector
• Power input: IEC C14
• Power supply voltage: AC 230V, 50 Hz
• Power consumption: 1500W
• Fuse: 8A
• Power switch: yes
• Power cord type: IEC C13 - CEE 7/7 (type E/F)
• Power cord length: 1.2 m
• IP protection rating: IPX0
• Operating temperature: -10 - 60°C
• Thermal protection: yes
• Housing material: cold-rolled steel
• Housing color: black and silver
• Mounting bracket: yes
• Mounting bracket type: yoke bracket
• Bracket mounting hardware: 2 knob screws + 2 washers
• Hanging capability: yes
• Permitted operating orientation: horizontal
• Non-slip feet: 4
• Device dimensions: 45 × 23 × 24 cm
• Net weight: 6 kg