Välj land för leverans

Rean har avslutats

EAT LPS Spänningsstabilisator

5/5

Produktkod: 349307

Rean har avslutats

EAT LPS Spänningsstabilisator

5/5

Produktkod: 349307

Rean har avslutats
Denna produkt tillverkas inte längre eller är inte en del av vårt erbjudande längre.
Elegant power supply. We at E.A.T. strongly believe that power supply is a part of signal path and the quality of power supply extremely significantly contribute to the sound quality. It is done without any compromise. Full bridge rectifying use for ultra-fast diodes followed with 8800uF filtration bank. Voltage regulator is fully discrete. No...

EAT LPS Spänningsstabilisator

Elegant power supply. We at E.A.T. strongly believe that power supply is a part of signal path and the quality of power supply extremely significantly contribute to the sound quality. It is done without any compromise.

Full bridge rectifying use for ultra-fast diodes followed with 8800uF filtration bank. Voltage regulator is fully discrete. No operational amplifier is used. Voltage reference is TL431. This all result in very low noise and perfect regulation. In many aspects it also over-performing battery power supply. Ripple voltage is lower than 1 microvolt! Voltage accuracy is better than ± 0,05%. The temperature drift is beyond every level of standard power supplies. LPS is Dedicated for E.A.T. phono stages and turntables.

- Dual output – Clean power supply – Two separate power supplies in one! – RFI eliminated from mains – Elegant looks

Ytterligare beskrivning på ditt språk är inte tillgänglig ännu. Beskrivningen på engelska kan hjälpa.

  • MODEL: E.A.T. LPS Linear Power Supply
  • INPUT POWER SUPPLY: 120V or 230V AC
  • OUTPUT VOLTAGE / CURRENT: 1 × 15V/2A ± 0,05%, noise max. 10uV
  • OUTPUT VOLTAGE / CURRENT: 1 × 18V/1.5A ± 0,05%, noise max 1uV
  • SUPPLIED CABLES: 1 × 15V 2.1mm (for E.A.T. C-Sharp, EAT C-Major and all Pro-Ject turntables) 1 × 15V XLR 4Pin (for E.A.T. E-Flat, E.A.T. Forte S*) 1 × 18V 2.5mm (for E.A.T. E-Glo S, EAT Forte* and all Pro-Ject Phono products except Phono Box RS and AD Box S2 Phono) 1 × 18V 2.1mm with longer connector shaft 14mm for Pro-Ject Xtension turntables
  • DIMENSIONS W × H × D: 435 × 60 × 272 mm
EAT

Baserat på antalet omdömen: 1

Kundrecensioner av produkten

Alla recensioner kommer från verifierade kunder som har köpt en produkt från oss tidigare.

W

Willem F.

nl Flagga
Nederländerna 09-03-2023

Mooie aanvulling op mijn EAT C-Sharp en mijn EAT E-Glo Petit. Voordelig geprijsd en snel en goed verzonden naar Nederland. Betaald via Klarna ook een voordeel van Muziker. Dus dik tevreden.

Automatiserad översättning

Denna recension kan inte översättas.

Dokument

Bruksanvisningar
Säkerhetsanvisningar

Se användarhandboken för specifika säkerhetsinstruktioner för den här produkten.