Välj land för leverans

FiiO KA5 Hi-Fi försteg för hörlurar

Produktkod: 1337379

FiiO KA5 Hi-Fi försteg för hörlurar

Produktkod: 1337379

The FiiO KA5 White is a flagship portable USB-C DAC and headphone amplifier that delivers desktop-grade decoding from a dongle-sized chassis. Built around dual CS43198 DACs and ultra-low-noise op amps, it supports PCM 768 kHz/32-bit and DSD256 native playback for studio-quality sound on the go. The aluminum-alloy body houses a 4.4 mm balanced…

FiiO KA5 Hi-Fi försteg för hörlurar

The FiiO KA5 White is a flagship portable USB-C DAC and headphone amplifier that delivers desktop-grade decoding from a dongle-sized chassis. Built around dual CS43198 DACs and ultra-low-noise op amps, it supports PCM 768 kHz/32-bit and DSD256 native playback for studio-quality sound on the go. The aluminum-alloy body houses a 4.4 mm balanced output, a 3.5 mm single-ended/S/PDIF socket, and an OLED display with onboard menu control in a compact 56.3 × 22 × 12 mm chassis weighing about 19 g.

  • Dual CS43198 DACs on a 6-layer immersion-gold PCB with ultra-low-noise op amps
  • Up to 265 mW per channel from the 4.4 mm balanced output at 32 Ω
  • Native PCM 768 kHz/32-bit and DSD256 decoding with five selectable digital filters
  • 4.4 mm balanced and 3.5 mm single-ended outputs, with the 3.5 mm port doubling as S/PDIF digital output
Ytterligare beskrivning på ditt språk är inte tillgänglig ännu. Beskrivningen på engelska kan hjälpa.

Portable USB-C DAC and Headphone Amplifier With Desktop-Grade Decoding

The FiiO KA5 White is a flagship portable DAC and headphone amplifier that brings true high-resolution decoding to a dongle-sized form factor. Built around dual Cirrus Logic CS43198 DACs and ultra-low-noise op amps, it converts USB-C digital audio into a clean analog signal. With native PCM playback up to 768 kHz/32-bit and DSD256 plus 4.4 mm balanced and 3.5 mm single-ended outputs, this model is the right choice for audiophiles who want flagship decoding without carrying a desktop stack.

What Sets the KA5 Apart in the Dongle DAC Category

This model mounts its dual CS43198 DACs on a six-layer immersion-gold PCB, paired with high-performance ultra-low-noise op amps, while the OLED display shows the sampling rate and working state and the buttons handle menu selection, function settings, volume and track switching.

Dual CS43198 DACs With Native High-Resolution Decoding

The conversion stage is the heart of any DAC, and the KA5 packs two of Cirrus Logic's flagship CS43198 chips, rated at up to 128 dB SNR (4.4 mm output, 32 Ω, A-weighted).

  • DAC Chipset: Dual Cirrus Logic CS43198 — two DAC chips on a 6-layer immersion-gold PCB
  • Maximum Sample Rate: 768 kHz / 32-bit PCM, DSD256 native — covers studio-grade high-resolution formats without downsampling, plus five selectable digital filters

Balanced and Single-Ended Headphone Outputs With Real Driving Power

Its amplifier stage feeds both a 3.5 mm single-ended socket and a 4.4 mm balanced socket, with output impedance below 0.35 Ω on both ports to avoid coloring multi-driver IEMs.

  • 3.5 mm Output Power: 122 mW + 122 mW @ 32 Ω, 13.5 mW @ 300 Ω — drives most portable headphones cleanly from the single-ended socket
  • 4.4 mm Balanced Output Power: 265 mW + 265 mW @ 32 Ω, 54 mW @ 300 Ω — enough headroom for full-size dynamic cans and demanding IEMs

USB-C Input, S/PDIF Output, and a Pocket-Sized Aluminum Chassis

Connectivity runs through a USB-C input that supports both UAC 2.0 and UAC 1.0 modes, with a shared 3.5 mm S/PDIF output for legacy DAC chains. Bus-powered from the source device with no internal battery, the unit measures about 56.3 × 22 × 12 mm and weighs 19 g.

  • Digital Input: USB Type-C — plug-and-play with Android, iOS (via the included Type-C to Lightning OTG cable), Windows, and macOS
  • Headphone Outputs: 3.5 mm single-ended, 4.4 mm balanced — covers both common portable termination standards
  • Frequency Response: 20 Hz – 50 kHz — flat within 0.1 dB across 20 Hz – 20 kHz

For Audiophiles Who Want Flagship Decoding Without a Desktop Stack

This model is the right choice for listeners who already own a library of high-resolution files and want to hear them properly through a portable rig. It suits owners of full-size dynamic headphones in the 16–300 Ω range who need the extra current of the 4.4 mm balanced output, as well as IEM users who want a low-output-impedance source. The 3.5 mm port also works as an S/PDIF digital output for feeding an external DAC or receiver.

White Aluminium Body With Electrophoresis Finish

The aluminium-alloy body of the white version is electrophoresis-coated, giving a rigid layer that resists scratches and corrosion and does not easily age or discolor. Firmware can be updated over USB, and on Android devices the KA5 can also be set up in the FiiO Control app, including high/low gain, five digital filters, L/R channel balance and screen flip.

Användning

Typ

DA Converter, Hörlursförstärkare

Kompatibel med

Android, Windows, iOS, macOS

Funktioner

Antal utgångar

2

THD

0,00037%

Format som stöds

PCM, DSD

WiFi

Nej

Bluetooth

Nej

DA-konvertering

Ja

Mikrofon

Nej

MIDI-gränssnitt

Nej

Egenskaper

Färg

Vit

Frekvensområde

20 Hz - 50 kHz

Impedans

16 Ohm, 300 Ohm

Samplingsfrekvens

768 kHz / 32 bit

Signal-brus-förhållande

≥ 128dB

Display

Ja

Ingångar och utgångar

Ingångar

USB-C

USB

Ja

S/PDIF

Ja

Mikrofoningång

Nej

Analoga ingångar

Nej

Utgång för hörlurar

Ja (2 )

Anslutningar

Typ-A-kontakt

USB C

Förpackning
Strömförsörjning

Batteridrift

Nej

Strömförsörjning

USB-C

Tillbehör

UK/EU Strömförsörjning ingår

Nej

Dimensioner och vikt

Höjd (cm)

5,63

Bredd (cm)

2,2

Djup (cm)

1,2

Vikt (g)

19

Land

Tillverkad i

Kina

Dokument

Bruksanvisningar
Information om tillverkaren
Tillverkare:
Guangzhou FiiO Electronics Technology Co., Ltd.
No.21 Longliang Road, Xialiang Village, Longgui Street, Baiyun District, 510540, Guangzhou,Guangdong, Kina
Ansvarig person:
FiiO
Säkerhetsanvisningar

Se användarhandboken för specifika säkerhetsinstruktioner för den här produkten.