Välj land för leverans

RockBoard RBO CAB F TMB 150 BK 150 cm MIDI-kabel

Produktkod: 1338163

RockBoard RBO CAB F TMB 150 BK 150 cm MIDI-kabel

Produktkod: 1338163

The RockBoard Flat Mini-TRS to MIDI Cable, TRS-MIDI Type B - 150 cm connects a 3.5 mm TRS-equipped MIDI controller to a standard 5-pin DIN MIDI input or output. Built around a flat rectangular conductor and a straight DIN 5-pin plug paired with an angled 3.5 mm stereo jack, it routes MIDI Type B signals cleanly while staying low-profile under…

RockBoard RBO CAB F TMB 150 BK 150 cm MIDI-kabel

The RockBoard Flat Mini-TRS to MIDI Cable, TRS-MIDI Type B - 150 cm connects a 3.5 mm TRS-equipped MIDI controller to a standard 5-pin DIN MIDI input or output. Built around a flat rectangular conductor and a straight DIN 5-pin plug paired with an angled 3.5 mm stereo jack, it routes MIDI Type B signals cleanly while staying low-profile under footswitches and pedals.

  • 150 cm length with flat rectangular profile that prevents cable jams and breakage on the pedalboard
  • Straight DIN 5-pin MIDI male to angled 3.5 mm TRS stereo male connector configuration
  • TRS-MIDI Type B pin assignment: MIDI 4 (Source) on tip, MIDI 5 (Sink) on ring, MIDI 2 (Shield) on sleeve
  • Compatible with Novation, 1010Music, Arturia, Malekko, Polyend, Faderfox and similar TRS-MIDI Type B devices
Ytterligare beskrivning på ditt språk är inte tillgänglig ännu. Beskrivningen på engelska kan hjälpa.

TRS to MIDI Cable for Compact Pedalboard Setups

The RockBoard Flat Mini-TRS to MIDI Cable, TRS-MIDI Type B - 150 cm connects a 3.5 mm TRS-equipped MIDI controller to a standard 5-pin DIN MIDI input or output. Built for pedalboard use, it keeps the MIDI signal path tidy and out of the way of footswitches and patch cables.

Flat Rectangular Conductor and Space-Saving Connectors

Built around a flat, rectangular conductor profile that significantly reduces twisting and mechanical stress, this cable stands out from generic round MIDI cables. The Type B pinout routes MIDI 4 (Source) to the TRS tip, MIDI 5 (Sink) to the TRS ring, and MIDI 2 (Shield) to the TRS sleeve.

Connector Configuration — Straight DIN to Angled TRS

A straight-to-angled geometry lets the MIDI plug sit flush against a controller while the TRS end drops flat against the pedalboard.

  • Connector A: 5-pin DIN MIDI male, straight — standard MIDI hardware input/output
  • Connector B: 3.5 mm TRS stereo male, flat angled — saves vertical space on the pedalboard
  • Connector Angle: Straight to Angled — keeps the cable flush against the board surface

TRS-MIDI Type B Pin Assignment

Type B wiring is the critical functional spec for this cable. Using the wrong type means no MIDI communication. Pins 1 and 3 are intentionally left unconnected.

  • Classification: TRS-MIDI Type B — matches Novation, 1010Music, Arturia, Malekko, Polyend and Faderfox devices

Cable Construction — Flat Profile

Reducing strain on solder joints and preventing the cable from springing back into a coil, the flat rectangular conductor is the key engineering choice here.

  • Length: 150 cm / 59 1/16" — enough reach for medium to large pedalboards
  • Cable Profile: Flat rectangular conductor — prevents twisting, breakage and cable jams
  • Color: Black — blends with standard pedalboard aesthetics

Användning

Kompatibel med

Universell

Egenskaper

Färg

Svart

Ingångar och utgångar

Mikrofoningång

Nej

Anslutningar

Typ-A-kontakt

MIDI Male

Typ-B-kontakt

Jack STEREO 3,5 mm Male

Anslutningsvinkel

Rak-vinklad

Förpackning

Förpackningens innehåll

MIDI Cable

Dimensioner och vikt

Längd

150 cm

Land

Tillverkad i

Kina

Dokument

Information om tillverkaren
Tillverkare:
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46, 08258, Markneukirchen, Tyskland
Ansvarig person:
Warwick GmbH & Co Music Equipment KG
Säkerhetsanvisningar

Se användarhandboken för specifika säkerhetsinstruktioner för den här produkten.