cookies
Du hittar våra "cookies" läckra
Syftet med cookies på Muzikers webbplats är att göra ditt besök hos oss till en trevlig upplevelse hela tiden. Samtycke till användning av alla cookies genom att klicka på knappen "Jag godkänner", eller i inställningarna välj bara de du gillar. Mer information.
Jag godkänner
Avvisa
Ej tillgängligt

Rode NT55-MP Overheadmikrofon

Certified matched pair of externally biased condenser microphone from RØDE. Like the NT5, the RØDE NT55 is a small-diaphragm, true-condenser cardioid microphone, sometimes referred to as a 'pencil mic'. The NT55 adds both a three position pad (0,...
Ej tillgängligt
Denna produkt är tillfälligt slut. Vi rekommenderar att du ställer in en tillgänglighetsavisering.

Produktkod: NT55-MP | ID: 315348

Rode NT55-MP Overheadmikrofon

Certified matched pair of externally biased condenser microphone from RØDE. Like the NT5, the RØDE NT55 is a small-diaphragm, true-condenser cardioid microphone, sometimes referred to as a 'pencil mic'. The NT55 adds both a three position pad (0, -10dB, -20dB) and three stage high pass filter (Off, 75Hz, 150Hz), and includes the interchangeable NT45-O omnidirectional capsule.

Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a 1/2" capsule, an active J-FET impedance converter with bipolar output buffer.

Its tight cardioid pickup pattern also makes it ideal for use as an indoor dialogue microphone for filmmaking on a mic stand or boom.

Ytterligare beskrivning på ditt språk är inte tillgänglig ännu. Beskrivningen på engelska kan hjälpa.
  • Finished in durable satin nickel
  • Cardioid or Omni polar pattern using included interchangable capsules
  • Gold sputtered 0.50" capsule
  • Three position PAD – 0 dB, -10 dB and -20 dB
  • Three position High-Pass Filter - flat, 75 Hz and 150 Hz
  • Low noise
  • The NT55 is designed and made in Australia
  • Acoustic Principle: Pressure Gradient
  • Active Electronics: JFET impedance converter with bipolar output buffer
  • Capsule: 0.50"
  • Polar Pattern: Cardioid, Omnidirectional
  • Address Type: End
  • Frequency Range: 20 Hz - 20 kHz
  • Output Impedance: 100 Ohm
  • Maximum SPL: 136 dB
  • Maximum Output Level: 8.0 mV (@ 1 kHz, 1% THD into 1 KOhm load)
  • Sensitivity: -38.0 dB re 1 Volt/Pascal (12.60 mV @ 94 dB SPL) +/- 2 dB @ 1 kHz
  • Equivalent Noise Level (A-weighted): 15 dBA
  • Power Options: +48 V phantom power
  • Output: XLR
  • Dimensions: 145 x 20 x 20 mm
  • Weight: 110 g

Parametrar och specifikationer

Funktioner

Polärt mönster


Egenskaper

Frekvensområde

Impedans


Akustik

Ljudtrycksnivå (SPL)


Förpackning

Konfiguration av erbjudande


Dimensioner och vikt

Vikt


Land

Tillverkad i

Australien


Rekommenderade tillbehör