Light4Me HAZE 900W Hazer

LIGHT4ME HAZE 900W is a DMX fog machine (hazer) for DJs, clubs, bands and lighting technicians that creates light, even fog to enhance the visibility of beams from spotlights, moving heads and lasers. At a wedding, concert or corporate event, simply fill the tank with water-based fluid and the device will be ready for operation after approximately 2-3 minutes. The 900W heating system delivers an output volume of up to 50 m³/min while the built-in fan helps distribute the fog throughout the space. Fog output and fan speed adjustment from 0-100% make it possible to match the amount of haze to the size of the stage and the type of lighting.

Even haze that enhances stage lighting beams

Thermal atomization of the fluid creates a fine haze suitable for use with lighting effects. Instead of a short, dense cloud, the device can provide even haze throughout the space, making beams from beam effects, lasers and spotlights more clearly visible. The 2.5 l tank and fluid consumption of approximately 40 ml/min allow the device to be used during longer events without frequent refilling. Continuous mode is particularly useful in clubs, on stages and during DJ sets.

Full hazer control via DMX, control panel or RF remote

Two DMX512 channels provide independent control of haze output and fan speed. This allows the device to be integrated into a larger lighting system and synchronized with programmed scenes. DMX input and output make it easy to daisy-chain the DMX signal to additional devices.A four-digit LED display and four buttons provide quick access to the most important settings. The control panel allows you to select the DMX address, adjust fog output and fan speed as well as set the operating time from 0 to 200 seconds and the interval between outputs from 0 to 200 seconds. The RF remote control with a range of approximately 8 meters also allows haze output control to be assigned to each of its buttons.

Stable construction and convenient mounting in stage installations

The yoke-style mounting bracket allows the device to be placed on the floor or suspended while maintaining a horizontal operating orientation. The cold-rolled steel housing with a black and silver finish as well as four non-slip feet help keep the hazer stable in an installation. The machine measures 40 × 20 × 24 cm and weighs 4 kg, making it convenient for mobile productions. Power is supplied through an IEC C14 inlet and the included 1.2 m IEC C13 power cord. The power switch provides convenient operation while thermal protection supports safe use within an operating temperature range of -10 to 60°C. The IPX0 rating indicates that the device is intended for dry indoor spaces. Compact and lightweight packaging makes transport and storage easier.

Technical specifications:

• Device type: DMX fog machine (hazer) with wireless remote control and mounting bracket
• Application: creating light, even fog that enhances light beams in stage, club and event applications
• Heating system power: 900W
• Haze generation system type: thermal atomization (fluid heating)
• Warm-up time: approx. 2-3 min
• Fog output volume: 50 m³/min
• Fog output adjustment: yes, 0-100%
• Built-in fan: yes
• Fan speed adjustment: yes
• Fan speed adjustment range: 0-100%
• Fog output duration adjustment: yes, 0-200 s
• Interval adjustment between successive fog outputs: yes, 0-200 s
• Continuous mode: yes
• Fluid tank capacity: 2.5 l
• Recommended fluid type: water-based fog fluid
• Fluid consumption: approx. 40 ml/min
• Control: DMX, wireless remote control, manual (control panel)
• Control protocol: DMX512
• Number of DMX channels: 2
• DMX channel functions: fog output adjustment, fan speed adjustment
• Manual operating mode: yes
• Control panel: LED display (7-segment, 4-digit) + 4 buttons
• Control panel functions: DMX address selection, fog output adjustment, fan speed adjustment, output duration adjustment, output interval adjustment and remote control settings
• Wireless remote control type: radio frequency (RF)
• Remote control function assignment: fog output control can be assigned to each remote control button
• Remote control range: approx. 8 m
• Remote control battery type: 23A 12V, included
• DMX input: 3-pin male XLR connector
• DMX output: 3-pin female XLR connector
• Power input: IEC C14
• Power supply voltage: AC 230V, 50 Hz
• Power consumption: 1000W
• Fuse: 5A
• Power switch: yes
• Power cord type: IEC C13 - CEE 7/7 (type E/F)
• Power cord length: 1.2 m
• IP protection rating: IPX0
• Operating temperature: -10 - 60°C
• Thermal protection: yes
• Housing material: cold-rolled steel
• Housing color: black and silver
• Mounting bracket: yes
• Mounting bracket type: yoke-style
• Bracket mounting hardware: 2 knob screws + 2 washers
• Suspended mounting: yes
• Permitted operating orientation: horizontal
• Non-slip feet: 4
• Device dimensions: 40 × 20 × 24 cm
• Net weight: 4 kg