cookies
Du hittar våra "cookies" läckra
Syftet med cookies på Muzikers webbplats är att göra ditt besök hos oss till en trevlig upplevelse hela tiden. Samtycke till användning av alla cookies genom att klicka på knappen "Jag godkänner", eller i inställningarna välj bara de du gillar. Mer information.
Jag godkänner
Avvisa
Deal

Audio-Technica ATM350UCW Kondensatormikrofoner för instrument

ATM350UcW terminated with locking 4-pin connector for A-T UniPak® body-pack wireless transmitters. 55" (1.4 m) cable. Includes AT8491U Universal Clip-on Mount, AT8490 5" Gooseneck, AT8468 Violin Mount (hook-and-loop fastener), and Protective...
Extra gifts
Få en gratis gåva genom att köpa denna produkt
I lager för webbutik 8 st.
Skickas imorgon ,
2024-05-06
2,549 kr
2,889 kr
- 11 %
Kondensatormikrofoner för instrument Audio-Technica ATM350UCW Kondensatormikrofoner för instrument

Audio-Technica ATM350UCW Kondensatormikrofoner för instrument

2,549 kr
2,889 kr
- 11 %

Produktkod: ATM350UcW | ID: 236920

Audio-Technica ATM350UCW Kondensatormikrofoner för instrument

ATM350UcW terminated with locking 4-pin connector for A-T UniPak® body-pack wireless transmitters. 55" (1.4 m) cable. Includes AT8491U Universal Clip-on Mount, AT8490 5" Gooseneck, AT8468 Violin Mount (hook-and-loop fastener), and Protective Carrying Case. The microphone’s cardioid polar pattern isolates the instrument by reducing side and rear pickup, and the switchable 80 Hz high-pass filter on the in-line power module helps control undesired low-frequency noise. The system also includes an AT8468 violin mount with hook-and-loop fastener and a protective carrying case.

Ytterligare beskrivning på ditt språk är inte tillgänglig ännu. Beskrivningen på engelska kan hjälpa.

Features
 Low-profile mic design for minimum visibility
 Crisp, clear, well-balanced microphone response, even at high SPLs
 Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
 UniMount® universal clip-on mount attaches securely to instrument bell and provides excellent shock resistance for the microphone
 Rugged UniMount® 9" gooseneck rigidly holds its shape, keeping microphone accurately positioned even during aggressive play
 In-line power module is equipped with a switchable 80 Hz high-pass filter to control undesired ambient noise
 Interchangeable elements available for hypercardioid and omnidirectional polar patterns
 Included violin mount with hook-and-loop fastener provides an additional mounting option
 
 Specs
 Element Fixed-charge Back Plate, Permanently Polarized Condenser
 Polar Pattern Cardioid
 Frequency Response 40 – 20,000 Hz
 Low Frequency Roll-off 80 Hz, 12 dB/octave
 Open Circuit Sensitivity –49 Db (3.5 Mv) Re 1v At 1 Pa
 Impedance 200 Ohms
 Maximum Input Sound Level 159 dB SPL, 1 Khz At 1% T.H.D.
 Dynamic Range (Typical) 130 dB, 1 Khz At Max SPL
 Signal-to-noise Ratio 65 dB, 1 Khz At 1 Pa
 Phantom Power Requirements 11– 52V DC, 3.5 Ma Typical
 Switch Flat, Roll-off
 Weight (Microphone) 14.5 g (0.5 Oz)
 Weight (Power Module) 90 g (3.2 Oz)
 Dimensions (Microphone) 37.8 mm (1.49'') Long,
 12.2 mm (0.48'') Maximum Body Diameter
 Dimensions (Power Module) 92 mm (3.62") Long,
 18.9 mm (0.74") Diameter
 Cable (Permanently Attached To Microphone), 3.2 mm (0.13") Diameter, 2-conductor Shielded Cable With Hirose Hr10-type Connector
 

Parametrar och specifikationer

Strömförsörjning

Batteridrift

Nej


Land

Tillverkad i

Storbritannien