Klark Teknik DN100 V2
Produktkod: DN100-V2 | ID: 435804
The DN100 has become an established favourite amongst both engineers and musicians alike. With its high headroom, dynamic response and sonic clarity, DN100 faithfully reproduces the character of electric and acoustic instruments and allows far more of the detail of musical performances to be captured. DN100 is intended for professional applications where +48 V phantom power is a standard feature on all mixing consoles, and its innovative design results in a significantly higher clipping point than many other active DI Boxes, providing +10 dBu output into a 2 kΩ load. This increased headroom means that much higher level input signals can be accommodated without the need for an attenuating pad. Combined with a very low noise input circuit topology, DN100 offers a very wide dynamic range, and only requires a single -30 dB pad for use when connecting directly to instrument amplifier outputs.
DN100 is built to handle the rigours of life on the road, a thick aluminium extrusion protects the electronics, and in turn is covered by a tough silicone rubber sleeve.
DN100 features one parallel-connected XLR and two ¼" TRS inputs, one which may also be used a link output for connection to a guitar or bass amplifier. When connecting to the XLR input only, the input impedance is 20 kΩ, ideal for line level equipment and offering even lower noise performance. This input impedance is far too low for guitar and bass pickups and is removed from the circuit when a jack plug is inserted into a ¼" TRS input, resulting in a nominal 1 MΩ input impedance, ideal for passive electric pickups.
Parametrar och specifikationer
Typ
Antal ingångsportar
3
Fantommatning
Kontroller
Rackmonterbar
Färg
Ingångar
6,3mm Jack (2 x), XLR
Mikrofoningång
Linjeingångar
Utgångar
XLR
Utgång för hörlurar
Förpackningens innehåll
Manual
Batteridrift
Strömförsörjning
48V Phantom
Bredd (mm)
118
Djup (mm)
112
Höjd (mm)
63
Nettovikt (kg)
0,44
Tillverkad i
Kina
Rekommenderade tillbehör