Syftet med cookies på Muzikers webbplats är att göra ditt besök hos oss till en trevlig upplevelse hela tiden. Samtycke till användning av alla cookies genom att klicka på knappen "Jag godkänner", eller i inställningarna välj bara de du gillar.
Mer information.
Water, dust and chemical resistantSeven step smart charge algorithmRecovery of fully discharged ‘dead’ batteriesAutomatic power supply functionSevere cold performance: down to -30 °CSeveral other battery life enhancing featuresLow power mode to...
Läs mer
Få en gratis gåva genom att köpa denna produkt
Extra rabatt på denna produkt med kod EXTRA5 Pris efter kodanvändning: 2,289,50 kr
Setup and configure, readout of voltage and current by Bluetooth Smart
Ultra high efficiency “green” battery charger With up to 95 % efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard.
Durable, safe and silent - Low thermal stress on the electronic components. - Protection against ingress of dust, water and chemicals. - Protection against overheating: the output current will reduce as temperature increases up to 60°C, but the charger will not fail. - The chargers are totally silent: no cooling fan or any other moving parts.
Reconditioning A lead-acid battery that has been insufficiently charged or has been left discharged during days or weeks will deteriorate due to sulfation. If caught in time, sulfation can sometimes be partially reversed by charging the battery with low current up to a higher voltage.
Recovery function for fully discharged batteries Most reverse polarity protected chargers will not recognize, and therefore not recharge a battery which has been discharged to zero or nearly zero Volts. The Blue Smart IP65 Charger however will attempt to recharge a fully discharged battery with low current and resume normal charging once sufficient voltage has developed across the battery terminals.
The VictronConnect app Setup, readout and configure your Blue Smart IP65 Charger via your smartphone. You can display the status of your charger and battery and even control the functions of your charger using the VictronConnect app. On your screen the readout of voltage and current is default available.
Storage mode: less corrosion of the positive plates Even the lower float charge voltage that follows the absorption period will cause grid corrosion. It is therefore essential to reduce the charge voltage even further when the battery remains connected to the charger during more than 48 hours.
Temperature compensated charging The optimal charge voltage of a lead-acid battery varies inversely with temperature. The Blue Smart IP65 Charger measures ambient temperature during the test phase and compensates for temperature during the charge process. The temperature is measured again when the charger is in low current mode during float or storage. Special settings for a cold or hot environment are therefore not needed.
Li-ion battery mode The Blue Smart IP65 Charger uses a specific charging algorithm for Li-ion (LiFePO₄) batteries, with automatic Li-ion under voltage protection reset.
Vattensporter
se
