Seajet 114 Propeller Primer Bottenfärg

Propeller primer is an epoxy primer for aluminum, aluminum alloy and bronze. Use before application of SEAJET 034 EMPEROR on to alluminium and bronze. Characteristics: - Maximises adhesion to aluminium and alloys and offers superior performance to etching primers. - Can be used above and below water, on stern gear, outboard legs, propellers, trim tabs etc. Type: Thin film epoxy primer. Recommended use: Primer for aluminum, aluminum alloy and bronze. Application details: - Thinner: SEAJET THINNER E, - Application Data: Airless spray, brush, roller, - Min.Temperature: 5 °C, - Max. humidity: 85% R.H. Propeller type: - For bronze surfaces: Key the surface by abrading using P80 grade abrasive wet and dry paper or Scotch Brite HPCSU-R. After final cleaning, apply 1 thin coat. - For outdrives and aluminium: P-220 abrasive paper is recommended to provide a physical key. Stir well before use. Apply one thin coat by brush, roller or spray. - For old antifouling: Remove before application. Antifoulings should only be wet sanded or chemically stripped. Coverage rate: 2.5m²/lt Colours: White, Black, Volvo Penta Dark Grey Pack size: 250 ml