Harken 434 Low-Load Rullningssystem

Harken® Small Boat furling systems allow the trailerable cruising or dinghy sailor to set and furl the jib from the cockpit. An optional hoistable ball bearing halyard swivel can be installed on your headstay so you can raise or lower the sail without removing the headstay. Swivels are independent of the headstay, allowing you to tension the luff separately from the mast rake.

FEATURES:

• Footnote:Includes drum and upper swivel. Does not include hoistable swivel. 
   
• Pin-to-pin length (mm): 64 mm
   
• Pin-to-pin length (in): 2 1/2 in
   
• Drum Ø (mm): 73 mm
   
• Drum Ø (in): 2 7/8 in
   
• Maximum line Ø (mm): 4 mm
   
• Maximum line Ø (in): 5/32 in
   
• Jaw width (mm): 8 mm
   
• Jaw width (in): 5/16 in
   
• Maximum luff wire Ø (mm): 3 mm
   
• Maximum luff wire Ø (in): 1/8 in
• Clevis pin Ø (mm): 6.4 mm
   
• Clevis pin Ø (in): 1/4 in
   
• Weight (g): 215 g
   
• Weight (oz): 7.6 oz
   
• Maximum working load (kg): 227 kg
   
• Maximum working load (lb): 500 lb
   
• Boat length - monohull (m): Under 4.9 m
   
• Boat length - monohull (ft): Under 16 ft
   
• Includes upper swivel: 162 
   
• Includes drum: 163