cookies
Du hittar våra "cookies" läckra
Syftet med cookies på Muzikers webbplats är att göra ditt besök hos oss till en trevlig upplevelse hela tiden. Samtycke till användning av alla cookies genom att klicka på knappen "Jag godkänner", eller i inställningarna välj bara de du gillar. Mer information.
Jag godkänner
Avvisa
Rean har avslutats

Antelope Audio Edge Quadro

Most advanced modeling microphone by Antelope Audio. This stereo mic features two large dual-membrane capsules and a rotating head. Delivering four channels for independent processing will allow for stereo techniques like M/S, X/Y, Blumlein, and...
Rean har avslutats
Denna produkt tillverkas inte längre eller är inte en del av vårt erbjudande längre.

Produktkod: EDGE-QUADRO | ID: 294380

Antelope Audio Edge Quadro

Most advanced modeling microphone by Antelope Audio. This stereo mic features two large dual-membrane capsules and a rotating head. Delivering four channels for independent processing will allow for stereo techniques like M/S, X/Y, Blumlein, and even 3D sound. Edge Quadro is the only microphone you’ll need for stereo and 360° sound recording. Two capsules perfectly aligned to eliminate any phase related problems made of 6-micron gold-sputtered dual-membranes each. Top head can be rotated at any angle even while recording so you can monitor any possibility for capturing your source. Achieve anything from M/S, X/Y, Blumlein and 360 recording with a total of 18 emulations! Specifications: Microphone type: Quadrosonic condenser microphone, Diaphragms: Two large condenser capsules with double-sided 6u-gold sputtered membranes. Top head is fully rotatable. , Diaphragm diameter: 34mm, Polar pattern: Multi-pattern (cardioid, figure-8, omnidirectional, Blumlein, M/S, X/Y), XY-stereo – set both capsules to Cardioid, offset 90°, Mid-side stereo – set the top capsule to Cardioid, and the bottom capsule to figure-8, Blumlein – Set both capsules to Figure-8, offset 90°, Self-noise: 19dB(A), SNR: 75dB(A), Frequency response: 20HZ ~ 20kHZ, Sensitivity: -35dB | 18mV/Pa (-1 to +3dB), THD+N: -116dB, Output impedance: 50 Ohms @ 1kHz, Power requirements: 48V DC phantom power, Output connector: 5-pin male XLR, Dimensions: 11,9″ x 2,1″ (303mm x 53mm), Weight: 1. 697 lbs (770 grams)

Parametrar och specifikationer

Rekommenderade tillbehör